Why does the Georgetown Loop loop? A railroad that crosses over itself

Written by

in

Last updated: November 18, 2026.

Why would anyone build a railroad that crosses over itself? The Georgetown Loop in Colorado looks like a puzzle in the mountains, but it was a clever answer to a very real problem.

Two old mining towns, Georgetown and Silver Plume, sit only about 2 miles apart in a steep, narrow canyon along Clear Creek. On a map that is a short walk. But Silver Plume is much higher up the mountain, and a train that went straight there would have faced a slope far too steep for the trains of the 1880s.

Quick facts

📏

Straight line

Georgetown and Silver Plume are about 2 miles apart.

⛰️

The climb

The track gains about 640 feet between the two towns.

🚂

The track

The winding route is about 4.5 miles long, more than twice the straight distance.

🌉

The bridge

The Devil’s Gate High Bridge crossed the gorge about 95 feet above the creek.

💡 Did you know? The Georgetown Loop was one of Colorado’s first visitor attractions. At its busiest, seven trains a day ran out of Denver, and a round-trip ticket cost only $3.

The Loop through time

1877

The railroad reaches Georgetown in August.

1879

Union Pacific engineers survey the route. The crew makes many mistakes, and the work is slow.

1884

The first trains arrive in Silver Plume.

1938

The last trains run.

1939

The Loop is taken apart.

1984

A rebuilt Loop reopens on August 1.

What is a grade?

Railroad engineers measure a slope with a number called the grade. A grade of 3 percent means the track rises 3 feet for every 100 feet it goes forward. A heavy train struggles on a steep hill, so engineers try to keep grades gentle.

The Georgetown Loop Railroad’s history page says that the straight way from Georgetown toward Silver Plume had an average grade of more than 6 percent, which was too steep for most trains. The Union Pacific’s chief engineer, Jacob Blickensderfer, planned a system of curves and bridges that cut the average grade to about 3 percent.

The trick: make the track longer

The answer was to make the track longer on purpose. A longer track climbs the same hill more slowly, a bit like a winding path up a mountain instead of a ladder. The line used horseshoe curves and four bridges across Clear Creek. The most famous was the Devil’s Gate High Bridge, where the upper track passed about 75 feet above the lower track. That is how a train came to cross over itself.

The trains were small ones. The rails were only 3 feet apart, which railroad people call narrow gauge.

Why a railroad to nowhere became a tourist treat

The line was meant to go much farther, all the way to the silver town of Leadville. It never did. It stopped a few miles past Silver Plume. So the Loop found a different job: carrying visitors who wanted to see the canyon and the great bridge. Read more in The race to Leadville in 1879.

Riding it today

The Loop was rebuilt in the 1970s and 1980s. New track was laid along the old route starting in 1973, and a new high bridge was built between 1983 and 1984 to the same design as the old one. Today you can ride a narrow-gauge train between Silver Plume and Devils Gate, near Georgetown, and there is an optional walking tour into the Lebanon Silver Mine. The park is just off Interstate 70, about 45 miles west of Denver.

What is real and what is made up

The Georgetown Loop, its bridge and the numbers and dates on this page are real history.

Loop Around, Book 7 of TRACE in Colorado, is a made-up story. The people in the book are invented.

This story comes from TRACE in Colorado by T. A. Held, a time-travel series for ages 9 to 12 with a What Was Real? page in every book.

Read the book: Loop Around (Book 7) · See all the TRACE in Colorado books

Previous post: Train and railroad books for kids

Next post: The Devil’s Gate High Bridge: the bridge that went up backwards

Comments

Leave a Reply

Please use your first name or a nickname only. Don’t share your full name, address, school, or email. Every comment is read before it appears.